







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Plano: What to Know First
We install and repair Belgard paver driveways, patios, walkways and pool decks across Plano as an independent Belgard service provider, and most residential jobs run three to six days from tear-out to cleanup. Paver driveway installation in Plano typically lands between $7,000 and $18,000, and you get that number in writing before anyone picks up a tool. The page is for homeowners whose Belgard surface is lifting, settling, draining wrong or due for replacement, and who want the price on the page before they call.
We’re not affiliated with or authorized by Belgard, and we don’t pretend otherwise. We’re a Plano construction contractor with up to 19 years of technician experience on hardscape, and we quote a flat written price with a written scope and warranty every time.
How Belgard Products Fail – and How We Fix Them
Belgard makes good pavers. Most of what goes wrong on a Plano Belgard driveway isn’t the paver itself. It’s the base under it, the joint sand in it, or the water that should have drained off it and didn’t. Here are the five failures we see most in Plano.
- Rutting and settling in the drive lane. Belgard’s Urbana Stone and Catalina Slate pavers get laid on a base that was compacted once and never proven. Plano’s black clay soil swells when it’s wet and shrinks when it’s dry, and a driveway that’s fine in March can show a depression at the tire tracks by August. We pull the affected field, re-tighten the base in lifts with a plate compactor, and re-set on a fresh bedding layer. The paver survives. The base is what we replace.
- Bulging and “tenting” at the edge. This is root pressure or edge restraint failure, and it shows up on Belgard Weston Stone borders where the spike-and-plate edge was set too shallow. Pavers creep outward, joints open, and the row at the curb starts to rotate. We reset the soldier course and re-anchor the edge restraint into a concrete collar, so the border has something to push against.
- Joint sand washing out. Belgard recommends polymeric joint sand for a reason. In Plano, spring and fall storms sheet water across a driveway whose slope is off by a quarter inch per foot, and sand leaves with it. You get loose pavers and weeds in the joints within a season. We correct the cross-slope first, then re-sand with polymeric. Sanding a driveway that drains wrong is money spent twice.
- Efflorescence that keeps coming back. That white haze on Belgard Mega-Lafitt or Catalina pavers is mineral salt rising through the surface. A one-time cleaner won’t hold if water is sitting under the paver. We find where the water’s trapped, fix the drainage, then treat the surface. If a crew tells you efflorescence is cosmetic-only, ask them where the moisture is going.
- Cracking under load near the apron. Where the driveway meets the street, Belgard pavers on a thin base take the full turning load of a vehicle. Cracks at the apron usually trace back to insufficient base depth at the transition, not a bad paver lot. We cut out the apron, deepen the base, and rebuild it to spec. That’s the section that decides whether the rest of the driveway holds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
- 1
Call and schedule. A live person answers, we get your address and the age of the surface, and we book a site visit.
- 2
Diagnostics on site. We probe the base depth, check slopes with a level, and photograph what we find. You see the photos whether or not you hire us.
- 3
The parts decision. If replacement pavers are needed, we match the Belgard series and color. Where the exact series is discontinued or a lead time won’t work, we show you the compatible aftermarket or alternate Belgard line and price both, so you’re choosing with numbers, not a recommendation.
- 4
Written price, written scope. Flat number, written warranty, no change until you sign a change order.
- 5
The work. Base correction, edge restraint, bedding, pavers, polymeric joint sand, compaction. Background-checked, uniformed crew.
- 6
Test and handoff. We water-test the slope and drainage, walk the finished surface with you, and hand over the photo record of what we found and what we did.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in Plano

| Belgard job | Typical Plano range |
|---|---|
| Paver driveway installation (Belgard) | $7,000 – $18,000 |
| Driveway replacement (paver or concrete) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway installation (adjacent / partial) | $4,500 – $12,000 |
What moves the number: square footage and paver pattern (a herringbone field takes more cuts than a running bond), base depth if the clay has to come out, edge restraint and drainage corrections, and whether pavers have to be sourced from a discontinued run. Sealing after installation adds a line item but is worth pricing up front rather than after a salt-caked winter.
Every quote is a flat written price with a written scope. Call (844) 761-8346 for a free estimate, and bring any competitor’s written quote for a free second opinion, line by line.
Why Plano Homeowners Call Rowan Construction Group Plano for Belgard Work
Belgard fields fail for reasons a general handyman won’t catch: base compaction, cross-slope, edge restraint depth. Our technicians have up to 19 years on hardscape and read those signals before they quote a fix. Every Plano job comes with a written price before work starts and the 365-Day Done Right Promise: if it’s not done right, we make it right. Work doesn’t proceed on a change until the change order is signed, which is why projects finish within a few percent of the agreed number. Every visit includes a documented photo record, and a live person answers calls 24/7. When a Belgard job also touches cabinets, counters, roofing or windows, we cover that too through our other trades and brands including KraftMaid, Kohler, GAF and PGT.
FAQs

Generally no, as long as the repair uses compatible materials and follows the installation spec for base and joint sand. Belgard’s warranty covers product defects, not installation or base failure, so the fix should restore the spec rather than just patch the surface. We keep a written record of what was replaced and why, which is the paperwork you’d need if a product claim ever came up. Call (844) 761-8346 for a free estimate.
Often yes. We check current Belgard lines for a compatible color and profile, and where there’s no match we price a partial field replacement so the mismatched section isn’t the whole driveway. We’ll show you both options in the written quote. Call (844) 761-8346 to schedule.
Most residential installs run three to six days, depending on square footage, base work and weather. Repairs to a rutted section or a failed edge can be one to two days. You get the timeline in writing with the price. Call (844) 761-8346 for a free estimate.
Repair makes sense when the failure is localized; replace when the base is failing across the whole field. If the rutting or heaving shows up in more than a couple of areas, rebuilding the base under the whole surface usually costs less over five years than repeated patching. We’ll tell you which one the evidence supports, with photos. Call (844) 761-8346.
We confirm the permit requirements for your address and handle the paperwork when a permit is required for hardscape or driveway changes. It’s included in the written scope, not billed as a surprise. Call (844) 761-8346 for a free estimate.
Written by the team at Rowan Construction Group Plano, serving Plano and nearby areas.












